Product Descriptions:

• The 9010CN N95 respirator is designed to help provide quality, reliable protection against certain non-oil based particles. Its low profile design offers better visibility and compatibility with a wide variety of safety equipment. Vertical flat-fold design offers convenient storage, portability and dispensing. The 3M 9010CN mask is individually packaged to help prevent contamination during storage. This particulate respirator mask is ideal for emergency relief operations where particulate exposures may be present.
• Suitable for respiratory protection, filtering dust, haze, bacteria, droplets and other harmful particles in the air
• Folding face mask
• 3M Proprietary Filter Media
• NIOSH 42 CFR 84
• Individually packaged prevents contamination
• Vertical flat-fold design for easy storage
• Two strap design and comfortable nose clip

Direction of use/Preparation:

1. Prestretch top and bottom straps before placing respirator on the face 2. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand 3. Position the respirator under your chin with the nosepiece up. Pull the top strap over your head resting it high at the top back of your head. Pull the bottom strap over your head and position it around the neck below the ears 4. Place your fingertips from both hands at the top of the metal nosepiece. Using two hands, mold the nose area to the shape of your nose by pushing inward while moving your fingertips down both sides of the nosepiece **Pinching the nosepiece using one hand may result in improper fit and less effective respirator performance. Use two hands. 5. Perform a User Seal Check prior to each wearing. To check the respirator-to-face seal, place both hands completely over the respirator and exhale sharply. Be careful not to disturb the position of the respirator. If air leaks around nose, readjust the nosepiece as described in step 4. If air leaks at the respirator edges, work the straps back along the sides of your head. If you CANNOT achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.